Setup

Before using your monitor, check that the following accessories are included in your carton:

•Power cord (1)•Video signal cable (1)•USB cable (1)•Exclusive Power Mac G3/G4 adapter (1)•Warranty card (1)•Notes on cleaning the screen’s surface (1)•This instruction manual (1)

Step 1: Connect your monitor to your computer

Turn off the monitor and computer before connecting.Notes

•Do not touch the pins of the video signal cable connector as this might bend the pins.

•When connecting the video signal cable, check the alignment of the connector. Do not force the connector in the wrong way or the pins might bend.

xConnecting to an IBM PC/AT or compatible computer

1

R

G

B HD VD

2

AC IN

 

to HD15 input

to video output

 

 

video signal cable

IBM PC/AT or compatible

(supplied)

computer

 

xConnecting to a Macintosh computer

Use the supplied exclusive Power Mac G3/G4 adapter.

1

R

G

B HD VD

2

AC IN

to HD15 input

exclusive Power Mac G3/G4 adapter (supplied)*

video signal cable

to video (supplied) output

Power Mac G3/G4

*Connect the supplied adapter to the computer before connecting the cable. This adapter is compatible only with Power Mac G3/G4 computers that have 3 rows of pins. If you connect to the other version of Macintosh series computer that has 2 rows of pins, you will need a different adapter (not supplied).

xConnecting to the five BNC connectors

1

R

G

B HD VD

2

AC IN

to R/G/B input

to HD/VD

input

Refer to the preceding examples to connect to your

computer.video signal cable (SMF-400, not supplied)*

*Connect the cables from left to right in the following order: Red-Green- Blue-HD-VD.

Note

Plug & Play (DDC) does not apply to the five BNC connectors. If you want to use Plug & Play, connect your computer to the connector using the supplied video signal cable.

6