Sony GV-D800 manual ST1

Changing the menu settings

Icon/item		Mode		Meaning
	AUDIO MIX	—––		To adjust the balance between the stereo 1 and stereo 2
				ST1	ST2
	PB MODE	zAUTO		To automatically select the system (Hi8/standard 8 or
				Digital8 ) that was used to record on the tape, and play
				back the tape
			/	To play back a tape that was recorded in the Hi8/
				standard 8 system when your VCR does not
				automatically distinguish the recording system
	A/V t DV OUT zOFF			To convert digital video signals into analog video signals
				via your VCR
		ON		To convert analog video signals into digital video siginals
				via your VCR
				“A/V t DV” appears on the LCD screen ( p. 47).
	LCD B. L.	z BRT NORMAL		To set the brightness on the LCD screen normal
		BRIGHT		To brighten the LCD screen
	LCD COLOR	—––		To adjust the color on the LCD screen
				to lighten		to darken

Notes on AUDIO MIX

•You can adjust the balance only for tapes recorded in the Digital8 system.

•When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance.

Note on PB MODE

The mode will return to the default setting when

–you remove the battery pack or power source.

–you turn the POWER switch to OFF.

Note on LCD B.L.

When you select BRIGHT, battery life is reduced by about 10 percent during recording.

52