Step 7: Inserting a tape or a “Memory Stick Duo”

Cassette tape

You can use mini DV cassettes only (p. 106).

•The recordable time varies depending on [REC MODE] (p. 53).

1Slide and hold the OPEN/EJECT lever in the direction of the arrow and open the lid.

OPEN/EJECT lever Lid

The cassette compartment automatically comes out and opens up.

2Insert a cassette with its window

facing up, then press .

Window-side

Push the center of the back of the cassette lightly.

when inserting a cassette tape.

“Memory Stick Duo”

You can use only a “Memory Stick

Duo” marked with or (p. 107).

•The number and time of recordable pictures varies depending on the image quality or the image size. For details, see page 45.

Insert the “Memory Stick Duo” into the “Memory Stick Duo” slot in the right direction until it clicks.

Access lamp

With the mark in the left

•If you force the “Memory Stick Duo” into the slot in the wrong direction, the “Memory Stick Duo,” the “Memory Stick Duo” slot, or image data may be damaged.

The cassette compartment automatically slides back in. Do not force the cassette into the compartment. This may cause a malfunction.

3Close the lid.

To eject the cassette

Proceed with the same steps as you would

To eject a “Memory Stick Duo”

Lightly push the “Memory Stick Duo” in once.

•When the access lamp is lit or flashing, your camcorder is reading/writing data. Do not shake or knock your camcorder, turn the power off, eject the “Memory Stick Duo,” or remove the battery pack. Otherwise, image data may be damaged.

18