•To set the end point for audio dubbing, beforehand, press ZERO SET MEMORY on the Remote Commander at the scene at which you want to stop audio dubbing during playback. After step 2 to 4, the recording stops automatically at the selected scene.
•You can only record additional audio over a tape recorded on your camcorder. The sound may deteriorate when you dub audio on a tape recorded on other camcorders (including other
To check the recorded sound
Play back the tape on which you have recorded audio (p. 23).
Touch [MENU] (STANDARD SET) [AUDIO MIX] .
60min | 0:00:00:00 |
AUDIO MIX
ST1 ST2
Touch / to adjust the balance of the original sound (ST1) and the sound recorded afterwards (ST2), then touch .
•The original sound (ST1) is output at the default setting.
•The adjusted audio balance returns to the default setting in about 5 minutes after the battery pack or other power sources have been disconnected.
Deleting recorded pictures from the “Memory Stick Duo”
1Slide the POWER switch down to turn on the PLAY/EDIT lamp.
2Touch .
60min 1152 | 2 / 10 101 | |
MEMORY PLAY | ||
|
|
|
|
|
|
3Select a picture you want to
delete with /.
•To delete all pictures at once, select [ALL ERASE] (p. 47).
4 Touch [YES].
•The pictures cannot be restored once they are deleted.
•You can delete pictures on the index screen (p. 23). You can easily search for the picture to be deleted by displaying 6 pictures at once.
Touch [ DELETE] the picture you want to delete [YES].
•Pictures cannot be deleted when a “Memory Stick Duo” with the
Dubbing/Editing
65