USB-PLY/EDT (USB-Play/Edit)

Select this when you view pictures stored in your camcorder on your computer (p. 70), or when you connect your camcorder to a PictBridge compliant printer via a USB cable (supplied) (p. 67).

STD-USB

Displays pictures saved on the “Memory Stick Duo.”

PictBridge

See page 67.

USB STREAM

Displays pictures saved on the tape.

DISP GUIDE

See page 16.

DATA CODE

Displays information recorded automatically (data code) during recording.

OFF

Data code is not displayed.

DATE/TIME

Displays the date and time.

CAMERA DATA (below)

Displays camera setting data.

This cannot be selected during Easy Handycam operation.

60min 0:00:00:00 1

2

6

AUTO

 

3

100 AWB

 

 

 

 

5

F1. 8 9dB

4

SteadyShot off* Exposure*

White balance* Gain*

Shutter speed Aperture value

* Appears only during tape playback.

•Camera setting data does not appear when movies on a “Memory Stick Duo” are played back.

•The exposure adjustment value (0EV), a shutter speed, and the aperture value appear when still images on a “Memory Stick Duo” are played back.

•appears for a picture recorded using a flash (optional).

•In the DATE/TIME data display, the date and time are displayed in the same area. If you record a picture without setting the clock, [--- --

----] and [--:--:--] will appear.

REMAINING

AUTO

Displays the remaining tape indicator for

Using

about 8 seconds in situations such as those

 

described below.

 

the

• When you set the POWER switch to PLAY/

EDIT or CAMERA-TAPE with a cassette

Menu

inserted.

 

 

 

• When you touch

(Play/Pause).

 

ON

Always displays the remaining tape indicator.

REMOTE CTRL (Remote control)

The default setting is [ON], allowing you to use the Remote Commander (p. 32).

•Set to [OFF] to prevent your camcorder from responding to a command sent by another VCR remote control unit.

•The setting returns to [ON] when you have the power source disconnected from your camcorder for more than 5 minutes.

REC LAMP (Recording lamp)

The camera recording lamp will not light up during recording when you set this to [OFF]. (The default setting is [ON].)

Continued 55