Step 4: Adjusting the LCD panel and viewfinder
Open the LCD panel 90 degrees to the camcorder (), then rotate it to the best angle to record or play ().
DISP/BATT INFO 180 degrees
(max.)
2
1
90 degrees (max.) 90 degrees to the camcorder
•Do not press the buttons on the LCD frame accidentally when you open or adjust the LCD panel.
•If you rotate the LCD panel 180 degrees to the lens side, you can close the LCD panel with the LCD screen facing out. This is convenient during playback operations.
•If you rotate the LCD panel 180 degrees to the lens side, you can see the image in the viewfinder.
You can view images using the viewfinder when you close the LCD panel to avoid wearing down the battery, etc.
Viewfinder
Viewfinder lens adjustment lever Move it until the picture is clear.
•You can adjust the brightness of the viewfinder backlight by selecting [LCD/VF SET] - [VF B.LIGHT] (p. 54).
•You can adjust the [FADER] and the [EXPOSURE] setting using the viewfinder (p. 48).
Started Getting
For
To darken the LCD screen
Press and hold DISP/BATT INFO for a few
seconds until appears.
This setting is practical when you use your camcorder in bright conditions or where you want to save battery power. The recorded picture will not be affected by the setting. To turn on the LCD backlight, press and hold DISP/BATT INFO for a few
seconds untildisappears.
•See [LCD BRIGHT] (p. 53) to adjust the brightness of the LCD screen.
15