Step 2: Charging the battery pack

POWER switch

/CHG (charge)

 

lamp
DC IN jackDC plug

 

To the wall outlet (wall socket)
Battery packAC Adaptor Power cord (Mains lead)
Started Getting

You can charge the “InfoLITHIUM” battery pack (H series) (p. 98) after attaching it to your camcorder.

Notes

You cannot attach any “InfoLITHIUM” battery pack other than the H series to your camcorder.

1 Connect the AC Adaptor to the DC IN jack on the Handycam Station.Be sure that the mark on the DC plug is facing up.

2 Connect the power cord (mains lead) to the AC Adaptor and the wall outlet (wall socket).

3 Slide the POWER switch in the direction of the arrow to OFF (CHG) (the default setting).

4 Attach the battery pack by sliding it in the direction of the arrow until it clicks.

5 Insert the camcorder into the Handycam Station securely, all the way to the bottom.

The /CHG (charge) lamp lights up and charging starts.When the /CHG (charge) lamp turns off, the battery pack is fully charged.

Notes

When inserting the camcorder into the Handycam Station, close the DC IN jack cover.

15