When connecting to your TV via a VCR

Connect your camcorder to the LINE IN input on the VCR using the A/V connecting cable. Set the input selector on the VCR to LINE (VIDEO 1, VIDEO 2, etc.).

When your TV is monaural (When your TV has only one audio input jack)

Connect the yellow plug of the A/V connecting cable to the video input jack and connect the white (left channel) or red (right channel) plug to the audio input jack of your TV or VCR.

If your TV/VCR has a 21-pin adaptor(EUROCONNECTOR)

You need the 21-pin adaptor (optional) to connect your camcorder to a TV for viewing recorded images (for models with the mark printed on the bottom surface only). This adaptor is designed for output use only.

TV/VCR

Notes

When the A/V connecting cable is used to output images, images are output with SD (standard definition) image quality.

Tips

If you connect your camcorder to the TV using more than one type of cable to output images, the order of priority of the TV input jacks is as

follows:

HDMI component S VIDEO video.

HDMI (High Definition Multimedia Interface) is an interface to send both video/audio signals. The HDMI OUT jack outputs high quality images and digital audio.

On “Photo TV HD”

Your camcorder is compatible with “Photo TV HD.” “Photo TV HD” allows for highly-detailed, photo-like depiction of subtle textures and colors. By connecting Sony’s Photo TV HD-compatible devices

using an HDMI cable* or a component A/ V cable**, a whole new world of photos can be enjoyed in breathtaking full HD quality.

*The TV will automatically switch to the appropriate mode when displaying photos.

**Setup of the TV will be necessary. Please refer to the instruction manual of your Photo TV HD-compatible TV for details.

Using “BRAVIA” Sync
You can do the playback operation with

 

the remote commander of your TV by

 

connecting your camcorder to a “BRAVIA”

 

Sync compatible TV launched in 2008 or

Recording/Playback

later with the HDMI cable.

 

HDMI cable

 

1 Connect your camcorder and a “BRAVIA” Sync compatible TV with the HDMI cable (optional).

2 Turn on your camcorder.

The TV input is switched automatically, and the image of your camcorder is displayed on the TV.

3 Operate the remote commander of the TV.You can do the following operations.

Display(VIEW IMAGES) of (HOME) by pressing the SYNC MENU button

Display an INDEX screen, such as the VISUAL INDEX screen, and play back the desired movies or still images by pressing

41