GENERAL SET

(Other setup items)

Touch , then .

If the item is not on the screen, touch / to change the page.

How to set

(HOME) menu page 59

(OPTION) menu page 76

The default settings are marked with .

DEMO MODE

The default setting is [ON], allowing you to view the demonstration in about 10 minutes, after you turn the POWER switch to (Movie).

Tips

The demonstration will be suspended in the following situations.

When you press START/STOP or PHOTO

When you touch the screen during the demonstration (The demonstration starts again after about 10 minutes)

When you turn the POWER switch to (Still)

When you press (HOME) or (VIEW

IMAGES)

REC LAMP (Recording lamp)

The camera recording lamp on the front of your camcorder lights up, as the default setting is [ON].

CALIBRATION

See page 101.

A.SHUT OFF (Auto shut off)5min

The camcorder is automatically turned off when you do not operate your camcorder for more than approximately 5 minutes.

NEVERThe camcorder is not automatically turned off.

Notes

When you connect your camcorder to a wall outlet (wall socket), [A.SHUT OFF] is automatically set to [NEVER].

QUICK ON STBY (Quick on standby)

You can set the desired turn off time of the camcorder with [QUICK ON STBY] while the Sleep mode is set (p. 28). The default setting is [10min].

Notes

While the Sleep mode is set, the setting of [A.SHUT OFF] becomes ineffective.

REMOTE CTRL (Remote control)

The default setting is [ON], allowing you to use the supplied Remote Commander (p. 108).

Tips

Set to [OFF] to prevent your camcorder from responding to a command sent by another VCR remote control unit.

CTRL FOR HDMI (Control forHDMI)

The default setting is [ON], allowing you to do the playback operation with the remote commander of your TV by connecting your camcorder to a “BRAVIA” Sync compatible TV with the HDMI cable (optional) (p. 41).

camcorder your Customizing

75