Functions used for recording/playback, etc. (Continued)

qhqs

0

qg qf qd

A mirror-image of the subject appears on the LCD screen, but the picture will be normal when recorded.

To use a tripod .......................

wa

Attach the tripod (optional: the length of the screw must be less than 5.5 mm (7/32 in.)) to the tripod receptacle wa using a tripod screw.

2

w;

qj

qk ql

wa

To record in mirror mode ..........

qh

Open the LCD panel qh 90 degrees to the camcorder (1), then rotate it 180 degrees to the lens side (2).

To use a Shoulder belt ..............

qd

Attach the Shoulder belt (optional) to its designated hook qd.Playback
To use PB zoom .................

2 0

You can magnify images from about 1.1 to 5 times (from about 1.5 to 5 times in still images) the original size.

Magnification can be adjusted with the power zoom lever 2 or the zoom buttons 0 on the LCD panel.

1Play back the picture you want to magnify.2Magnify the picture with T (Telephoto).

3Touch the screen at the point you want to display in the center of the displayed frame.

4Adjust the magnification with W (Wide angle)/T (Telephoto).To cancel, touch [END].

You cannot change the zoom speed with the zoom buttons 0 on the LCD panel.

Recording/playback
To check the remaining battery

 

(Battery Info)..........................

qs

Set the POWER switch to OFF (CHG), then press DISP/BATT INFO qs. The approximate recordable time in the selected format and battery information appear for about 7 seconds. You can view the battery information for up to 20 seconds by

30