Dubbing to VCR/DVD device, etc. (Continued)

•When [VCR HDV/DV] is set to [AUTO], and the signal switches between HDV and DV formats, the picture and sound are interrupted temporarily.

•When the recorder is HDR-HC3E, set [VCR HDV/DV] to [AUTO] on the recorder and the player (p. 61).

•When the player and the recorder are both HDV1080i compatible devices such as HDR- HC3E and connected with the i.LINK cable, after pausing or stopping and then resuming the recording, the images will be a bit choppy or rough at that point.

•Set [DISP OUTPUT] to [LCD PANEL] (default setting) when connecting with an A/V connecting cable (p. 65).

When connecting with the A/V connecting cable with S VIDEO (optional)

Connect with S VIDEO jack instead of the video plug (yellow). This connection produces pictures more faithfully. This connection produces higher quality DV format pictures. The audio will not be output when you connect with the S VIDEO cable alone.

Dubbing to another device1 Prepare your camcorder for playback.Insert the recorded cassette.Slide the POWER switch to turn on the PLAY/EDIT lamp.Set [TV TYPE] according to the playback device (TV, etc.) (p. 64).2 Prepare your VCR/DVD device for recording.When dubbing to the VCR, insert a cassette for recording.When dubbing to the DVD recorder, insert a DVD for recording.

If your recording device has an input selector, set it to the appropriate input (such as video input1 and video input2).

3 Connect your VCR/DVD device to your camcorder as a recording device.See page 70 for connection details.4 Start playback on the camcorder, and recording on the VCR/DVD device.

Refer to the operating instructions supplied with your recording device for details.

5 When dubbing is complete, stop your camcorder and the VCR/DVD device.

•To record the date/time and camera settings data when connected by the A/V connecting cable, display them on the screen (p. 64).

•The following cannot be output via the HDV/ DV interface (i.LINK):

–Indicators

–Pictures edited with [PICT.EFFECT] (p. 58) or [D.EFFECT] (p. 57)

–Titles that are recorded on other camcorder

•Pictures recorded in the HDV format are not

output from the HDV/DV Interface (i.LINK) jack during playback pause or in any playback mode other than normal playback.

•Note the following when connecting with an i.LINK cable:

–The recorded picture becomes rough when a picture is paused on your camcorder while recording to a VCR/DVD device.

–Data codes (date/time/camera settings data) may not be displayed or recorded depending on the device or application.

–You cannot record the picture and sound separately.

72