Fujitsu S SERIES manual LCD screen, Information on LCD monitor, Monitor settings

Models: S SERIES

1 116
Download 116 pages 22.3 Kb
Page 36
Image 36
LCD screen

Working with the notebook

LCD screen

Information on LCD monitor

High-quality TFT displays are installed in notebooks from Fujitsu Siemens Computers GmbH. The specification of the monitor resolution indicates how many pixels can be displayed. For example, "XGA" stands for 1024 x 768 pixels. Each pixel consists of three so-called subpixels of the colours red, green and blue. As a result, an XGA monitor consists of 1024 x 768 x 3 = 2,359,296 subpixels.

The standard of production techniques today cannot guarantee an absolutely fault-free monitor. A few isolated constant lit or unlit pixels may be present. To ensure the highest possible quality, Fujitsu Siemens Computers uses only monitors that at least comply with the standard

DIN ISO 13406-2 (Class II).

TFT monitors are operated with background lighting. The luminosity of the background lighting can decrease during the period of use of the notebook. The brightness of your monitor can be set individually with the brightness control keys of the keyboard.

Monitor settings

Setting resolution (under Windows)

You can change the screen resolution under Start - Settings- Control Panel - Display - Settings and then selecting from the Resolution field.

Setting font size (under Windows)

Under Start - Settings - Control Panel - Display - Settings you can choose between a larger and a smaller font in the Font size field.

Setting the display brightness

You can adjust the brightness of your LCD screen with the keys Fn + F6 or Fn + F6 , screen brightness will be reduced and with Fn + F7 increased.

Synchronising the display on the LCD screen and an external monitor

Fn

+

F7

: With

Your notebook supports the simultaneous display on the LCD screen and an external monitor. If the picture does not appear correctly on the LCD monitor, press the key combination Fn + F10 several times, or switch the external monitor off and then on again. This achieves good picture synchronisation.

Adjusting the speed of the mouse pointer

You can change the speed of the mouse pointer under Start - Settings - Control Panel - Mouse and clicking on the Motion tab.

26

A26391-K144-Z120-1-7619, edition 2

Page 36
Image 36
Fujitsu S SERIES manual LCD screen, Information on LCD monitor, Monitor settings, Setting resolution under Windows