Fujitsu S SERIES manual Settings in BIOS Setup, Start BIOS Setup, Exitto exit the BIOS Setup

Settings in BIOS Setup

In BIOS Setup you can set the system functions and the hardware configuration of the notebook. The settings can only be changed via the keyboard.

When it is delivered, the notebook is set to factory default settings. You can change these settings in BIOS Setup. Any changes you make take effect as soon as you save and quit the BIOS Setup.

The BIOS Setup programme contains the following menus:

Main:for system settings as time, date, hard disk and monitor selection

Advanced: for system settings such as ports and keyboard

Security: for password settings and safety functions

Boot:for configuring the boot sequence

Info:for displaying the system configuration (e.g. processor and memory configuration)

Exit:to exit the BIOS Setup

Start BIOS Setup

►Restart the notebook (switching ON/OFF or warm boot). The following display briefly appears on the screen during start-up:

<ESC> Diagnostic screen <F12> Boot Menu

►When this message appears, press the function key

<F2> BIOS Setup

F2 .

If a password has been assigned:

i ► Enter the password and press the Enter key.

If you have forgotten the password, contact your system administrator or contact our hotline/help desk.

A26391-K144-Z120-1-7619, edition 2 81