Fujitsu S SERIES manual Configuring Security Panel, Assigning the supervisor password

Models: S SERIES

1 116
Download 116 pages 22.3 Kb
Page 62
Image 62
Configuring Security Panel

Security functions

Configuring Security Panel

When you put your notebook into operation for the first time, the Security Panel is not activated yet. Assign the necessary passwords with the programs FJSECS.EXE (Supervisor password) and FJSECU.EXE (User password). These programs are ready for installation in the folder AddOn and are also provided on the "Drivers & Utilities" CD.

You require the User password each time you want to start your notebook (or want to return to your working interface from the energy-saving mode). Should you forget your User password, you can unlock the notebook with the Supervisor password and assign a new User password.

We recommend that you make a note of the security passwords and keep them in a safe

! place.

If you should have forgotten both the User password and the Supervisor password you cannot start your notebook any more. In this case you must call our Help Desk. The deletion of security passwords is not a warranty case and is therefore subject to charge.

Back up your data on external data carriers at regular intervals.

To set the passwords, proceed in the following order:

Assigning the supervisor password

The setup programme can be found under Start - AddOn.

Double-click on the symbol to start the setup programme for FJSECS.EXE. The programme starts.

or

Enter the programme name FJSECS.EXE under Start - Run.

Click on OK.

The programme starts.

The program instructions will help you configure the password.

You see a field with five lines and 4 keys each with the numbers 1 to 4 for selecting your password. You can select one number or a combination of several numbers in each line.

► Click one to four keys in the first line.

► You can also click a key or key combination in additional lines if desired.

Here it is important that you do not skip a line. In the end your password consists of one to five numbers or one to five number combinations.

i

With a combination you must press the security keys with these numbers simultaneously

later when entering the password.

52

A26391-K144-Z120-1-7619, edition 2

Page 62
Image 62
Fujitsu S SERIES manual Configuring Security Panel, Assigning the supervisor password, Security functions