5 | Press [ENTER]. |
| |
| The station’s programs are displayed. |
ENTER
6 | Use the Up and Down [ | ]/[ ] |
| buttons to select a program, and | |
ENTER | then press [ENTER]. |
|
|
| |
| Playback starts and the following | |
| screen appears. |
|
| PLAY | 1/45 |
ENTER | iRadio station name |
|
| Streaming program name |
|
| 01:29 | |
| MP3 128kbps 16bit/44.1kHz |
|
| RETURN |
|
Once you’ve added a station to the list, simply select it on the Internet Radio screen, and then press [ENTER] to start playback.
Notes:
• When connected to an Internet radio station that uses |
the MP3 streaming format, the MP3 indicator lights |
up. When connected to an Internet radio station that |
uses the WMA streaming format, the WMA indicator |
lights up. |
• If you’re using a narrowband Internet connection (e.g., |
56K modem or ISDN), depending on the station, |
Internet radio may not work satisfactorily. For best |
results, use a broadband connection (e.g., cable |
Network Settings
This section explains how to configure the AV receiver’s network settings manually.
If your router’s DHCP server is enabled, you don’t need to change any of these settings, as the AV receiver is set use DHCP to configure itself automatically by default (i.e., DHCP is set to Enable). If, however, your router’s DHCP server is disabled, for example, you’re using static IP addresses, you’ll need to configure these set- tings yourself, in which case, a knowledge of Ethernet networking is essential.
What’s DHCP?
DHCP (Dynamic Host Configuration Protocol) is used by routers, computers, the AV receiver, and other devices to automatically configure themselves on a network.
What’s DNS?
The DNS (Domain Name System) translates domain names into IP addresses. For example, when you enter a domain name such as www.onkyousa.com in your Web browser, before accessing the site, your browser uses DNS to translate this into an IP address, in this case 63.148.251.142.
1 | Press the [RECEIVER] REMOTE |
| |
| MODE button, followed by the |
RECEIVER | [SETUP] button. |
| The main menu appears onscreen. |
S |
|
E |
|
T |
|
UP |
|
modem, xDSL modem, etc). |
2
ENTER
ENTER
Use the Up and Down [
]/[ ] buttons to select “7. Hardware Setup,” and then press [ENTER].
The Hardware Setup menu appears.
7.Hardware Setup
1.Remote Control 2.Zone2/Zone3 3.Tuner 4.Analog Multich 5.HDMI 6.Network
117
