Zone 2 and Zone
Adjusting the Volume of Zones
Muting Zones
Remote
controller
ZONE3
ZONE2
LEVEL LEVEL
AV receiver
On the remote controller, press the [ZONE 2] or [ZONE 3] REMOTE MODE button, and then use the
On the AV receiver, press the [ZONE 2] or [ZONE 3] button, press the [LEVEL] button, and then use the Up [ ] and Down [] buttons.
ZONE3
ZONE2
MUTING
On the remote controller, press the [ZONE 2] or [ZONE 3] REMOTE MODE button, and then press the [MUTING] button.
To unmute a zone, on the remote controller, press the [ZONE 2] or [ZONE 3] REMOTE MODE button, and then press the [MUTING] but- ton again.
Adjusting the Tone of Zone 2
1 | On the AV receiver, press the |
| |
| [ZONE 2] or [ZONE 3] button. |
| AV receiver |
| ZONE 2 |
Adjusting the Balance of Zones
1 | On the AV receiver, press the |
| |
| [ZONE 2] or [ZONE 3] button. |
| AV receiver |
| ZONE 2 |
| ZONE 3 |
| |
2 | TONE | Press the AV receiver’s [TONE] | |
button repeatedly to select Bal- | |||
|
| ||
|
| ance. | |
3 |
| Use the Up [ ] and Down [ ] | |
|
| buttons to adjust the balance. |
You can adjust the balance from 0 in the center to +10 dB to the right or +10 dB to the left in 2 dB steps.
| ZONE 3 |
| |
2 | TONE | Press the AV receiver’s [TONE] | |
button repeatedly to select Bass | |||
|
| ||
|
| or Treble. | |
3 |
| Use the Up [ ] and Down [ ] |
buttons to adjust the bass or tre- ble.
You can boost or cut the Bass or Treble from
Notes:
•Zones can also be unmuted by adjusting the volume.
•The tone cannot be adjusted for Zone 3.
•The Zone 2 level, balance, and tone functions have no effect on the ZONE 2 PRE OUT when the Zone 2 Out setting is set to Fixed (page 122).
•The Zone 3 level and balance functions have no effect on the ZONE 3 PRE OUT when the Zone 3 Out set- ting is set to Fixed (page 122).
124