Advanced Setup—Continued

4

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “4. Level Cali- bration,” and then press [ENTER].

The Level Calibration screen appears and the pink noise test tone is output by the front left speaker.

2-4.Level Calibration

Left

-12.0dB

Center

-12.0dB

Right

-12.0dB

Surr Right

-12.0dB

Surr Back R

-12.0dB

Surr Back L

-12.0dB

Surr Left

-12.0dB

Subwoofer

-15.0dB

6

Repeat step 5 for each speaker

 

 

so that the volume of the test

 

tone from each speaker is the

 

same.

 

If you’re using a handheld sound level

 

meter, adjust the level of each speaker

 

so that it reads 75 dB SPL at the listen-

 

ing position, measured with C-weight-

 

ing and slow reading.

 

 

7

Press the [SETUP] button.

Setup closes.

 

 

S

 

E

 

T

 

UP

Note:

Levels cannot be adjusted for speak- ers set to No or None in the Speaker Configuration (page 94).

5

 

Use the Up and Down [

]/[

]

 

 

 

 

buttons to select a speaker, and

 

 

use the Left and Right [

]/[

]

 

ENTER

buttons to adjust the level.

 

 

 

 

Levels can be adjusted from –12 to +12 dB in 0.5 dB steps (–15 to +12 dB for the subwoofer).

Notes:

You can set different levels for front Speakers A and front Speakers B, but not the other speakers (i.e., sub- woofer, center, surround, and sur- round back).

The Center level cannot be set if the currently selected speakers (Speak- ers A or Speakers B) is set to BTL (page 51), or Center is set to None (page 94) or Not Use (page 97).

The Surr Right and Surr Left levels cannot be set if the currently selected speakers (Speakers A or Speakers B) is set to BTL (page 51), or Surround is set to None (page 94) or Not Use (page 97).

The Surr Back R and Surr Back L levels cannot be set if Speaker Type Front A or Front B is set to Bi-Amp or BTL (page 51), Surr Back is set to None (page 94) or Not Use

(page 97), or Powered Zone 2 is being used (page 121).

The Subwoofer levels cannot be set if Subwoofer is set to No (page 95).

Note:

Speaker levels can also be adjusted by using the dedi- cated buttons on the remote controller. Press the [TEST TONE] button to output the test tone. Use the [CH SEL] button to select each speaker, and use the

[LEVEL–] and [LEVEL+] buttons to adjust the level.

100

Page 100
Image 100
Onkyo TX-NR905 instruction manual 100

TX-NR905 specifications

The Onkyo TX-NR905 is a high-performance home theater receiver that epitomizes advanced audio engineering and user-friendly features. This powerhouse was designed for audiophiles and home theater enthusiasts who demand superior sound quality and a wide array of capabilities.

One of the standout features of the TX-NR905 is its 7.1 channel surround sound, delivering an immersive audio experience suitable for any cinematic environment. The receiver boasts an impressive power output, ensuring dynamic and clear sound across all frequency ranges. With the integration of Onkyo’s High Current Amplification System, users can enjoy powerful sound without distortion, even at high volumes.

The TX-NR905 supports various audio formats, including Dolby TrueHD, DTS-HD Master Audio, and other high-resolution audio technologies. This makes it an excellent choice for those looking to enjoy the latest high-definition movies and music with studio-quality sound. Moreover, the inclusion of Audyssey MultEQ XT technology allows for automated room calibration, ensuring that the listening environment is tuned for optimal performance, regardless of room acoustics.

Connectivity is another area where the TX-NR905 excels. The receiver features multiple HDMI inputs and outputs, supporting 1080p video and beyond, allowing seamless integration with modern video sources such as Blu-ray players, streaming devices, and gaming consoles. In addition to HDMI, the receiver includes legacy inputs such as component and composite video, ensuring compatibility with older devices.

The Onkyo TX-NR905 also features a user-friendly interface, with an intuitive remote control and an on-screen display that facilitates easy navigation through settings and options. For modern users, built-in Wi-Fi and Ethernet connectivity allow for wireless streaming from popular services like Spotify, Pandora, and others, broadening the listening options available.

Finally, with its solid construction and sleek design, the Onkyo TX-NR905 not only performs exceptionally but also adds a touch of elegance to any home theater setup. With a blend of high-quality audio, smart features, and robust connectivity, the TX-NR905 stands out as a great option for elevating your home entertainment system. Whether watching movies, playing games, or listening to music, the Onkyo TX-NR905 provides an experience that is both versatile and immersive.