Onkyo TX-NR905 130, Using Macros, Making Macros, Running Macros, Deleting Macros

Controlling Other Components—Continued

Using Macros

You can program the remote controller’s MACRO but- tons to perform a sequence of remote control actions.

Example:

To play a CD you typically need to perform the follow- ing actions:

1.Press the [RECEIVER] REMOTE MODE button to select the Receiver remote controller mode.

2.Press the [ON] button to turn on the AV receiver.

3.Press the [CD] INPUT SELECTOR button to select the CD input source.

4.Press the [CD] REMOTE MODE button to select the CD remote controller mode.

5. Press the Play [ ] button to start playback on the CD player.

You can program a MACRO button so that all five actions are performed with just one button press.

2	Press the buttons whose actions
	you want to program into the
	macro in the order you want them
	performed.
	For the CD example in the left column,
	you’d press the following buttons:
	[ON], [CD] INPUT SELECTOR, [CD]
	REMOTE MODE, Play [ ].
3	When you’ve finished, press the
	MACRO button again.
	The Remote indicator flashes twice.
	If you enter eight commands, the pro-
	cess will finish automatically.

Note:

•If any of the buttons you used to make a macro are taught new commands, the macro will no longer work properly and will have to be made again.

Making Macros

Each MACRO button can store one macro, and each macro can contain up to eight commands.

								Remote
								indicator
	ON	STANDBY				TV
							INPUT
	DVD	VCR/DVR		CBL/SAT
	1	2		3			+
	GAME/TV	AUX1		AUX2			TV CH
	4	5		6			-
	TAPE	TUNER		CD
	7	8		9
	PHONO	NET/USB		D. TUN			TV VOL
MACRO	+10	0		CLEAR
	--/---10 11 12
	INPUT SELECTOR
1, 2, 3		MACRO
	1	2		3			ZONE3
		REMOTE MODE
	DVD	VCR		CD			ZONE2
REMOTE				CDR/MD/DOCK
	TV	CABLE		NET/USB			RECEIVER	RECEIVER
MODE
		SAT					TAPE/AMP
	DIMMER						SLEEP
			U	ME
		EN			N
		PM				U
		O
		T
	+
	CH		ENTER				VOL
	DISC
	ALBUM

Running Macros

Press the MACRO [1], [2], or [3] button.

The commands in the macro are trans- mitted in the order in which they were programmed. Keep the remote control- ler pointed at the AV receiver until all of the commands have been transmit- ted.

Macros can be run at any time, regard- less of the current remote controller mode.

Deleting Macros

1	While holding down the
	[RECEIVER] REMOTE MODE but-

1

REMOTE MODE

DVD VCR

CD TV CDR/MD/DOCK

CABLE NET/USB SAT

RECEIVER

TAPE/AMP

While holding down the REMOTE MODE button of the remote con- troller mode you want to use at the start of the macro, press MACRO button [1], [2], or [3].

The Remote indicator lights up.

For the CD example in the left column, you’d press and hold the [RECEIVER] REMOTE MODE button, and then press MACRO button [1], [2], or [3].

RECEIVER	ton, press the MACRO button
	whose macro you want to delete.

2 Press the MACRO button again.

130