Troubleshooting—Continued

There’s no picture from a source connected to an HDMI IN

When the HDMI Monitor setting is set to No, and the Resolution setting is set to anything other than Through (see page 52), no video is output by the

HDMI OUT.

If the message “Resolution Error” appears on the AV receiver’s display, this indicates that your TV does not support the current video resolution and you need to select another resolution on your DVD player.

The onscreen menus don’t appear

On your TV, make sure that the video input to which the AV receiver is connected is selected.

The picture is distorted

On non-North American models, specify the TV sys- tem used in your area in the “TV Format Setup” on page 66.

Tuner

Reception is noisy, stereo FM reception suffers from hiss, or the FM STEREO indicator doesn’t light up

Relocate your antenna.

Move the AV receiver away from your TV or com- puter.

Listen to the station in mono (page 69).

When listening to an AM station, operating the remote controller may cause noise.

Passing cars and airplanes can cause interference.

Concrete walls weaken radio signals.

If nothing improves the reception, install an outdoor antenna.

Remote Controller

The remote controller doesn’t work

Make sure that the batteries are installed with the cor- rect polarity (page 15).

Make sure that the remote controller is not too far away from the AV receiver and there’s no obstruction between the remote controller and the AV receiver’s remote control sensor (page 15).

Make sure you’ve selected the correct remote control- ler mode (page 16).

Make sure you’ve entered the correct remote control code (page 126).

Can’t control other components

Make sure you’ve selected the correct remote control- ler mode (page 16).

If you’ve connected an -capableOnkyo MD recorder, CD recorder, or RI Dock to the TAPE IN/OUT jacks, or an RI Dock to the GAME/TV IN jacks, for the remote controller to work properly, you must set the Input Display to MD, CDR, or DOCK, respectively (see page 57).

The entered remote control code may not be correct. If more than one code is listed, try each one.

If none of the codes work, use the Learning function to learn the commands of the other component’s remote controller (page 129).

With some AV components, certain buttons may not work as expected, and some may not work at all.

To control an Onkyo component that’s connected via

, point the remote controller at the AV receiver. Be sure to enter the appropriate remote control code first (page 127).

To control an Onkyo component that’s not connected

via , or another manufacturer’s component, point the remote controller at that component. Be sure to enter the appropriate remote control code first (page 126).

Can’t learn commands from another remote controller

When learning commands, make sure that the trans- mitting ends of both remote controllers are pointing at each other.

Are you trying to learn from a remote controller that cannot be used for learning? Some commands cannot be learned, especially those that contain several instructions.

Recording

Can’t record

On your recorder, make sure the correct input is selected.

To prevent signal loops and damage to the AV receiver, input signals are not fed through to outputs with the same name (e.g., TAPE IN to TAPE OUT or VCR/DVR IN to VCR/DVR OUT).

When the Pure Audio listening mode is selected, video recording is not possible because no video signals are output. Select another listening mode.

133

Page 133
Image 133
Onkyo TX-NR905 instruction manual 133

TX-NR905 specifications

The Onkyo TX-NR905 is a high-performance home theater receiver that epitomizes advanced audio engineering and user-friendly features. This powerhouse was designed for audiophiles and home theater enthusiasts who demand superior sound quality and a wide array of capabilities.

One of the standout features of the TX-NR905 is its 7.1 channel surround sound, delivering an immersive audio experience suitable for any cinematic environment. The receiver boasts an impressive power output, ensuring dynamic and clear sound across all frequency ranges. With the integration of Onkyo’s High Current Amplification System, users can enjoy powerful sound without distortion, even at high volumes.

The TX-NR905 supports various audio formats, including Dolby TrueHD, DTS-HD Master Audio, and other high-resolution audio technologies. This makes it an excellent choice for those looking to enjoy the latest high-definition movies and music with studio-quality sound. Moreover, the inclusion of Audyssey MultEQ XT technology allows for automated room calibration, ensuring that the listening environment is tuned for optimal performance, regardless of room acoustics.

Connectivity is another area where the TX-NR905 excels. The receiver features multiple HDMI inputs and outputs, supporting 1080p video and beyond, allowing seamless integration with modern video sources such as Blu-ray players, streaming devices, and gaming consoles. In addition to HDMI, the receiver includes legacy inputs such as component and composite video, ensuring compatibility with older devices.

The Onkyo TX-NR905 also features a user-friendly interface, with an intuitive remote control and an on-screen display that facilitates easy navigation through settings and options. For modern users, built-in Wi-Fi and Ethernet connectivity allow for wireless streaming from popular services like Spotify, Pandora, and others, broadening the listening options available.

Finally, with its solid construction and sleek design, the Onkyo TX-NR905 not only performs exceptionally but also adds a touch of elegance to any home theater setup. With a blend of high-quality audio, smart features, and robust connectivity, the TX-NR905 stands out as a great option for elevating your home entertainment system. Whether watching movies, playing games, or listening to music, the Onkyo TX-NR905 provides an experience that is both versatile and immersive.