Onkyo TX-NR905 Assign, and then press, Input/Output Assign menu, Appears, Hdmi Input menu appears

First Time Setup—Continued

1	Press the [RECEIVER] button,
RECEIVER	followed by the [SETUP] button.
	The main menu appears onscreen.
S
E
T
UP
2	Use the Up and Down [ ]/[ ]
	buttons to select “1. Input/Output
ENTER	Assign,” and then press
	[ENTER].
	The Input/Output Assign menu
	appears.
ENTER

3 Use the Up and Down [ ]/[ ]

buttons to select “2. HDMI Input,” and then press [ENTER].

ENTER

The HDMI Input menu appears.

	1-2.HDMI Input
	DVD	---
	VCR/DVR	---
	CBL/SAT	---
ENTER	GAME/TV	---
	AUX1	---
	AUX2	---

4 Use the Up and Down [ ]/[ ]

buttons to select an input selec- tor, and use the Left and Right

ENTER

[]/[ ] buttons to select:

IN1: Select if the video component is connected to HDMI IN 1.

IN2: Select if the video component is connected to HDMI IN 2.

IN3: Select if the video component

ENTER

is connected to HDMI IN 3. IN4: Select if the video component

is connected to HDMI IN 4.

-- -:Select this to upconvert and output composite video, S-Video, and component video sources from the HDMI outputs.

5		Press the [SETUP] button.
	S	Setup closes.
	E
	T
	UP

Notes:

•Each HDMI IN cannot be assigned to more than one input selector.

•For composite video, S-Video, and component video upconversion for the HDMI OUT MAIN or HDMI OUT SUB, the HDMI Monitor setting must be set to Main or Sub, respectively (see page 52). See page 34 for more information on video signal flow and upcon- version.

•When an HDMI IN is assigned to an input selector as explained here, the digital audio input for that input selector is automatically set to the same HDMI IN. See “Digital Input Setup” on page 58.

•This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.

55