Zone 2 and Zone 3—Continued
Zone 2 Video Output
The AV receiver features a composite video output for connection to a TV in Zone 2, so you can enjoy both audio and video in that zone.
Hookup
•Use a composite video cable to connect the AV receiver’s ZONE 2 OUT V jack to a composite video input on your Zone 2 TV.
Main room
TV
AV receiver
ZONE 2
OUT
Zone 2
TV
Note:
•The ZONE 2 OUT V jack outputs video from compo- nents connected to composite video inputs and
Zone 2 12V Trigger
When Zone 2 is turned on, the output from the ZONE 2 12V TRIGGER OUT goes high (+12 volts, 100 milliam- peres max). Connecting this jack to a
Connecting Zone 3
Zone 3 speakers must be connected to an amp in Zone 3.
Connecting Your Zone 3 Speakers
You can enjoy
Hookup
•Use an RCA audio cable to connect the AV receiver’s ZONE 3 PRE OUT L/R jacks to an analog audio input on your Zone 3 amp.
•Connect your Zone 3 speakers to the speaker termi- nals on your Zone 3 amp.
Main room |
TV |
AV receiver |
ZONE 2 ZONE 3
L
R
PRE OUT
Zone 3 |
|
| IN |
R | L |
Receiver/ |
|
integrated amp |
|
Note:
•With the default settings, the Zone 3 volume must be set on the Zone 3 amp. If your Zone 3 amp has no vol- ume control, set the Zone 3 Out setting to Variable so that you can set the Zone 3 volume on the AV receiver (see page 122).
120