Connecting Your Speakers—Continued

Speaker Connection Precautions

Read the following before connecting your speakers:

•You can connect speakers with an impedance of between 4 and 16 ohms. If the impedance of any of the connected speakers is 4 ohms or more but less than 6, be sure to set the speaker impedance to 4 ohms (see page 51). If you use speakers with a lower impedance, and use the amplifier at high volume levels for a long period of time, the built-in amp protection circuit may be activated.

•Disconnect the power cord from the wall outlet before making any connections.

•Read the instructions supplied with your speakers.

•Pay close attention to speaker wiring polarity. Connect positive (+) terminals to only positive (+) terminals, and negative (–) terminals to only negative (–) termi- nals. If you get them the wrong way around, the sound will be out of phase and will sound unnatural.

•Unnecessarily long or very thin speaker cables may affect the sound quality and should be avoided.

•Be careful not to short the

positive and negative wires. Doing so may damage the AV receiver.

• Don’t connect more than one cable to each speaker termi- nal. Doing so may damage the AV receiver.

• Don’t connect a speaker to several terminals.

Attaching the Speaker Labels

The AV receiver’s positive (+) speaker terminals are color-coded for ease of identification. (The negative (–) speaker terminals are all black.)

Speaker terminal

Color

Front left, Zone 2 left

White

 

 

Front right, Zone 2 right

Red

 

 

Center

Green

 

 

Surround left

Blue

 

 

Surround right

Gray

 

 

Surround back left

Brown

 

 

Surround back right

Tan

 

 

The supplied speaker labels are also color-coded and you should attach them to the positive (+) side of each speaker cable in accordance with the above table. All you need to do then is to match the color of each label to the corresponding speaker terminal.

Connecting the Speaker Cables

1

Strip about 5/8" (15

5/8" (15 mm)

 

mm) of insulation from

 

 

the ends of the

 

 

speaker cables, and

 

 

twist the bare wires

 

 

tightly, as shown.

 

2

Unscrew the terminal.

 

3

Fully insert the bare wire.

 

4 Screw the terminal tight.

25

Page 24 Page 26
Page 25
Image 25
Onkyo TX-NR905 Speaker Connection Precautions, Attaching the Speaker Labels, Connecting the Speaker Cables
Page 24 Page 26

TX-NR905 specifications

The Onkyo TX-NR905 is a high-performance home theater receiver that epitomizes advanced audio engineering and user-friendly features. This powerhouse was designed for audiophiles and home theater enthusiasts who demand superior sound quality and a wide array of capabilities.

One of the standout features of the TX-NR905 is its 7.1 channel surround sound, delivering an immersive audio experience suitable for any cinematic environment. The receiver boasts an impressive power output, ensuring dynamic and clear sound across all frequency ranges. With the integration of Onkyo’s High Current Amplification System, users can enjoy powerful sound without distortion, even at high volumes.

The TX-NR905 supports various audio formats, including Dolby TrueHD, DTS-HD Master Audio, and other high-resolution audio technologies. This makes it an excellent choice for those looking to enjoy the latest high-definition movies and music with studio-quality sound. Moreover, the inclusion of Audyssey MultEQ XT technology allows for automated room calibration, ensuring that the listening environment is tuned for optimal performance, regardless of room acoustics.

Connectivity is another area where the TX-NR905 excels. The receiver features multiple HDMI inputs and outputs, supporting 1080p video and beyond, allowing seamless integration with modern video sources such as Blu-ray players, streaming devices, and gaming consoles. In addition to HDMI, the receiver includes legacy inputs such as component and composite video, ensuring compatibility with older devices.

The Onkyo TX-NR905 also features a user-friendly interface, with an intuitive remote control and an on-screen display that facilitates easy navigation through settings and options. For modern users, built-in Wi-Fi and Ethernet connectivity allow for wireless streaming from popular services like Spotify, Pandora, and others, broadening the listening options available.

Finally, with its solid construction and sleek design, the Onkyo TX-NR905 not only performs exceptionally but also adds a touch of elegance to any home theater setup. With a blend of high-quality audio, smart features, and robust connectivity, the TX-NR905 stands out as a great option for elevating your home entertainment system. Whether watching movies, playing games, or listening to music, the Onkyo TX-NR905 provides an experience that is both versatile and immersive.
Top Page Image Contents