Onkyo TX-NR905 Setting Speakers A and Speakers B, Advanced Setup—Continued, Notes

Advanced Setup—Continued

Setting Speakers A and Speakers B

These settings are not set automatically by the Auto- matic Speaker Setup function (see page 61).

If you’re using Speakers B, you can choose whether or not to use the subwoofer, center, surround, and surround back speakers with the Speakers A and Speakers B con- figurations independently. You cannot choose whether or not to use the front speakers.

Use the remote controller’s [SP A] or [SP B] button to select Speakers A or Speakers B, respectively.

13	Press the Down [ ] button to
	display the bottom half of the
	Speaker Config screen.
	ENTER

15

ENTER

ENTER

Use the Up and Down [ ]/[ ] buttons to select “Center,” and then use the Left and Right

[]/[ ] buttons to select:

Not Use: Select if you don’t want to use the center speaker with Speakers A or Speakers B.

Use: Select if you do want to use the center speaker with Speakers A or Speakers B.

Note:

•Cannot be set if the currently selected speakers (Speakers A or Speakers B) is set to BTL (page 51), or Center (step 7) is set to None.

2-2.Speaker Config
Speakers A
Subwoofer	Not Use
Front	Use
Center	Not Use
Surround	Use
Surr Back	Use

Notes:

•The bottom half of the Speaker Con- fig screen can only be displayed when the Speakers Type Front B set- ting is set to something other than Not Use (page 51).

•You can switch between the Speak- ers A and Speakers B settings on either half of the Speaker Config screen.

16

ENTER

ENTER

Use the Up and Down [ ]/[ ] buttons to select “Surround,” and then use the Left and Right

[]/[ ] buttons to select:

Not Use: Select if you don’t want to use the surround speakers with Speakers A or Speakers B.

Use: Select if you do want to use the surround speakers with Speakers A or Speakers B.

Note:

•Cannot be set if the currently selected speakers (Speakers A or Speakers B) is set to BTL (page 51), or Surround (step 8) is set to None.

17

Use the Up and Down [ ]/[ ]

14

ENTER

ENTER

Use the Up and Down [ ]/[ ] buttons to select “Subwoofer,” and then use the Left and Right []/[ ] buttons to select:

Not Use: Select if you don’t want to use the subwoofer with Speakers A or Speakers B.

Use: Select if you do want to use the subwoofer with Speakers A or Speakers B.

Note:

•Cannot be set if Subwoofer (step 5) is set to No.

ENTER

ENTER

buttons to select “SurrBack,” and then use the Left and Right

[]/[ ] buttons to select:

Not Use: Select if you don’t want to use the surround back speak- ers with Speakers A or Speak- ers B.

Use: Select if you do want to use the surround back speakers with Speakers A or Speakers B.

Note:

•Fixed at Not Use if Surround (step 16) is set to Not Use.

•Cannot be set if Speaker Type Front B is set to Bi-Amp or BTL (page 51), SurrBack is set to None (step 9), or Powered Zone 2 is being used (page 121).

97