Advanced
18 | Press the [SETUP] button. |
| |
| Setup closes. |
S |
|
E |
|
T |
|
UP |
|
Note:
•This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow
buttons.
Speaker Distance
These settings are set automatically by the Automatic Speaker Setup function (see page 61).
With the Speaker Distance settings, you can specify the distance from each speaker to the listening position. You can set the distances for front Speakers A and front Speakers B independently. The other speakers (i.e., sub- woofer, center, surround, and surround back) use the same distance settings for Speakers A and Speakers B.
1 |
|
| Press the [RECEIVER] REMOTE |
|
|
| |
|
|
| MODE button, and then use the |
| RECEIVER | remote controller’s [SP A] or | |
|
|
| [SP B] button to select Speakers |
|
|
| A or Speakers B, respectively. |
|
|
| Note: |
|
|
| • Speakers B cannot be selected if |
SP A |
| SP B | Speaker Type Front B is set to Not |
|
|
| Use. |
2 | ET | Press the [SETUP] button. | |
| |||
| The main menu appears onscreen. | ||
| S | UP |
|
|
|
|
3
ENTER
ENTER
Use the Up and Down []/[ ] buttons to select “2. Speaker Setup,” and then press [ENTER].
The Speaker Setup menu appears.
2.Speaker Setup
1.Speaker Settings 2.Speaker Config 3.Speaker Distance 4.Level Calibration 5.Equalizer Settings 6.THX Audio Setup
4
ENTER
ENTER
Use the Up and Down []/[ ] buttons to select “3. Speaker Dis- tance,” and then press [ENTER].
The Speaker Distance screen appears.
Unit | feet |
Left | 12.0ft |
Center | 12.0ft |
Right | 12.0ft |
Surr Right | 12.0ft |
Surr Back R | 12.0ft |
Surr Back L | 12.0ft |
Surr Left | 12.0ft |
Subwoofer | 12.0ft |
Note:
•Speakers that you set to No or None in the Speaker Configuration (page 94) cannot be selected.
98