Onkyo TX-NR905 instruction manual Lock Setup, Network, Advanced Setup—Continued

Models: TX-NR905

1 136
Download 136 pages 45.09 Kb
Page 110
Image 110
Network

Advanced Setup—Continued

HDMI power control only works with HDMI-compat- ible components that support it and may not work properly with some components due to their settings or compatibility.

When set to Enable, the AV receiver consumes more power.

When set to Enable, the AV receiver enters Ready mode when set to Standby, and the READY indicator lights up instead of the STANDBY indicator (not North American model). Also, the AV receiver’s AC outlets will be on all of the time regardless of whether the AV receiver is set to On or Standby, or Ready mode in this case.

TV Control

Select Enable to control the AV receiver from an RIHD- compatible TV connected via HDMI.

Disable: TV Control disabled.

Enable: TV Control enabled.

Notes:

Select Disable if your TV is incompatible or you’re note sure about its compatibility.

The TV Control setting can be set only when the above Control and Power Control settings are both set to Enable.

Note:

After changing the Control, Power Control, or TV Control setting, be sure to turn all of your compo- nents off and then back on again. Refer to the instruction manuals for your other components.

Network

See “Network Settings” on page 117.

Lock Setup

Lock

With this setting, you can protect your settings by lock- ing the setup menus.

Locked: Setup menus locked. Unlocked: Setup menus unlocked.

When Locked is selected, only this Lock Setup item can be accessed.

110

Page 110
Image 110
Onkyo TX-NR905 instruction manual Lock Setup, Network, Advanced Setup—Continued