Adjusting the Listening
3
ENTER
ENTER
Use the Up and Down []/[ ] buttons to select an input selec- tor, and then press [ENTER].
The audio formats supported by that input selector appear.
Analog/PCM | Last Valid | |
Dolby Digital | Last Valid | |
DTS | Last Valid | |
D.F.2ch | Last | Valid |
D.F.Mono | Last | Valid |
192/176.4k: Specifies the default lis- tening mode for high resolution
192kHz and 176.4 kHz digital sources, such as
Dolby TrueHD: Specifies the default listening mode for Dolby TrueHD sources, such as
If the input selector is assigned to an HDMI IN, use the Down [ ] button to select the audio formats shown on the following screen.
Multich PCM | Last Valid |
192k/176.4k | Last Valid |
Dolby True HD | Last Valid |
Last Valid | |
DSD | Last Valid |
For the TUNER input selector, Analog is the only format available.
or HD DVD (input via HDMI).
DSD Multi: Specifies the default lis- tening mode for DSD multichannel sources, such as SACD.
5 |
| When you’ve finished, press the |
|
| |
|
| [SETUP] button. |
S |
| Setup closes. |
ET | UP |
Note:
4
ENTER
ENTER
Use the Up and Down [ ]/[ ] buttons to select an audio for- mat, and use the Left and Right []/[ ] buttons to select a lis- tening mode.
Only listening modes compatible with the audio format can be selected (see page 80).
Analog/PCM: Specifies the default lis- tening mode for analog and PCM sources.
Dolby Digital: Specifies the default lis- tening mode for Dolby Digital sources.
DTS: Specifies the default listening mode for DTS sources.
D.F. 2ch: Specifies the default listening mode for
D.F. Mono: Specifies the default listen- ing mode for mono sources in a digital format, such as Dolby Digital or DTS.
Multich PCM: Specifies the default listening mode for multichannel PCM sources, such as
•This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow
buttons.
93