Preamplifier
Subwoofer trim adjustment
'adjust'
ADJUST
VOL
SOURCE
If you use a subwoofer speaker as part of your AV system, you may find that when watching a DVD you want to adjust the volume level of the subwoofer without affecting any of the other speakers. This is done by adjusting the subwoofer trim.
The subwoofer trim range is
To adjust the level of subwoofer trim:
●Repeatedly press ‘adjust’ on the front panel or ADJUST on the handset until the front panel shows the subwoofer trim display.
●To increase the level of trim, repeatedly press or hold 
on the handset or 
on the front panel.
● To decrease the level of trim, repeatedly press or hold on the handset or | on |
the front panel. |
|
To exit subwoofer trim adjustment:
●Press SOURCE + / SOURCE – on the front panel, or the key for the current source on the handset.
or
●Wait a few seconds for the display to change to the current source display.
Balance adjustment
'adjust'
ADJUST
VOL
SOURCE
Fader balance
This function allows you to shift the balance between the front and rear speakers.
The fader balance range is from 10 increments to the front, to 10 increments to the rear, with neutral balance being 0.
To shift the fader balance:
●Repeatedly press ‘adjust’ on the front panel or ADJUST on the handset until the front panel shows the fader balance display.
●To shift the fader balance to the front, repeatedly press or hold 
on the handset
or 
on the front panel.
●To shift the fader balance to the rear, repeatedly press or hold 
on the handset or
on the front panel.
36
