Sony HDR-SR1 Step 2: Charging the battery pack

You can charge the “InfoLITHIUM” battery pack (M series) (p. 118) after attaching it to your camcorder.

DC IN jack

POWER switch

CHG

(charge)

lamp

Battery

DC plug

Jack cover

Power cord

AC Adaptor To the wall outlet

1 Slide the POWER switch in the direction of the arrow to OFF (CHG) (The default setting).

3 Connect the AC Adaptor to the DC IN jack of your camcorder.

Open the jack cover, and connect the DC plug of the AC Adaptor.

Jack cover

Facing up the v mark on the DC plug, match it with the v mark on your camcorder.

4 Connect the power cord to the AC Adaptor and the wall outlet.

The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off when the battery is fully charged.

2 Attach the battery pack by sliding it in the direction of the arrow until it clicks.

5 Disconnect the AC Adaptor from the DC IN jack on your camcorder.