You cannot delete all images at one time.
• Release the lock on the
You cannot format the “Memory Stick Duo.”
• Release the lock on the
The data file name is not indicated correctly.
•Only the file name is displayed, unless the directory structure conforms to the universal standard.
•The file is damaged.
•The file format is not supported by your camcorder (p. 116).
The data file name flashes.
•The file is damaged.
•The file format is not supported by your camcorder (p. 116).
RecordingRefer also to “Adjusting the image during recording” (p. 99).
Pressing START/STOP or PHOTO does not record images.
•The playback screen is displayed. Set the POWER switch to (Movie) or (Still) (p. 37, 38).
•Your camcorder is recording the scene you have just shot on the hard disk. You cannot make new recording during this period (p. 38).
•The hard disk of the camcorder is full. Delete unnecessary images (p. 55). Or perform [ FORMAT] (p. 66).
•Total number of movie scenes or still images exceeds the recordable capacity of your camcorder (p. 19). Delete unnecessary images (p. 55).
•While activating [DROP SENSOR] (p. 80), you may not record movies/still images.
You cannot record a still image.
•The playback screen is displayed. Set your camcorder to recording standby (p. 38).
•You can capture up to 3 still images only during movie recording.
•Release the lock on the
•The “Memory Stick Duo” has run out of space. Use a new “Memory Stick Duo” or format the “Memory Stick Duo” (p. 66). Or delete the unnecessary images (p. 56).
•You cannot record a still image together with:
–[SMTH SLW REC]
–[FADER]
–[D.EFFECT]
–[PICT.EFFECT]
Continued ,
Troubleshooting
97