%(Moisture condensation warning)*

Slow flashing

•Remove the power source, and then leave it for about 1 hour (p. 132).

(High temperature warning) Slow flashing

•The temperature of your camcorder is getting higher. Turn off your camcorder and leave it for a while in a cool place.

Fast flashing*

•The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place.

(Warning indicator pertaining to “Memory Stick Duo”)

•No “Memory Stick Duo” is inserted (p. 35).

(Warning indicators pertaining to “Memory Stick Duo” formatting)*

•The “Memory Stick Duo” is damaged.

•The “Memory Stick Duo” is not formatted correctly (p. 73, 128).

(Warning indicator pertaining to incompatible “Memory Stick Duo”)*

•An incompatible “Memory Stick Duo” is inserted (p. 73, 128).

- (Warning indicator pertaining to the write-protect of the “Memory Stick Duo”)*

•The write-protect tab on the “Memory Stick Duo” is set to lock (p. 128).

•Access to the “Memory Stick Duo” was restricted on another device.

(Warning indicator pertaining to the flash)

Slow flashing:

• Still charging

Fast flashing:

•There is something wrong with the flash.

(Warning indicator pertaining to camera-shake warning)

•The amount of lights is not sufficient, so camera-shake easily occurs. Use the flash.

•The camcorder is unsteady, so camera- shake easily occurs. Hold the camcorder steady with both hands and shoot the image. However, note that the camera-shake warning indicator does not disappear.

*You hear a melody when the warning indicators appear on the screen (p. 85).

Description of warning messages

If messages appear on the screen, follow the instructions.

xDrive

ZDrive error. Turn on power again.

•A problem may have occurred with the disc drive. Turn off and then on again.

xMoisture condensation

%Moisture condensation. Turn off for 1H. (p. 132)

%Condensation. Cannot open. Remove disc later. (p. 132)

Troubleshooting

Continued , 119