Step 2: Charging the battery pack
You can charge the “InfoLITHIUM” battery pack (M series) (p. 130) after attaching it to your camcorder.
DC IN jack
POWER switch
CHG
(charge)
lamp
Battery
DC plug
Jack cover
Mains lead
AC Adaptor To the wall socket
1 Slide the POWER switch in the direction of the arrow to OFF (CHG) (The default setting).
3 Connect the AC Adaptor to the DC IN jack of your camcorder.
Open the jack cover, and connect the DC plug of the AC Adaptor.
Jack cover
Facing up the v mark on the DC plug, match it with the v mark on your camcorder.
4 Connect the mains lead to the AC Adaptor and the wall socket.
The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off when the battery is fully charged.
2 Attach the battery pack by sliding it in the direction of the arrow
until it clicks.
5 Disconnect the AC Adaptor from
the DC IN jack on your camcorder.
b Notes
• Disconnect the AC Adaptor from the DC IN jack holding both the camcorder and the DC plug.
26