Troubleshooting One

Problem

Possible Cause

Correction

Unit does not operate.

The unit is unplugged.

Plug in the unit.

 

Breaker is tripped or fuse is blown.

Reset breaker or replace fuse. Check to make sure there is not a short in

 

 

 

the electrical circuit.

 

 

Ice machine selector switch is in the "OFF" position.

Set the rocker switch on the grille of the ice machine to the "ON" posi-

 

 

tion.

 

 

 

 

 

 

Unit operates but does not produce any ice.

The unit has just been started and it has been less

Ice produced when the unit is initially started will melt off in the bin. Ice

 

than 6 hours.

will accumulate in the bin. In 6 hours there can be a few cubes in the

 

 

bin. This is normal operation.

 

Typical ice production cycle can take up to 1.5

Check the unit in 24 hours for ice accumulation in the bin.

 

 

 

hours. Initial startup cycles can be longer.

 

 

 

 

 

The selector switch is in the "OFF" or "CLEAN"

Set the rocker switch on the grille of the ice machine to the "ON" posi-

 

position.

tion.

 

No water in the reservoir.

Make sure that the reservoir drain plug is installed. Check the water line

 

 

 

 

to the unit to make sure it is on and that there are no restrictions or

 

 

kinks in the line. Check all filters to make sure they are not restricted or

 

 

plugged.

 

Distributor tube is restricted.

See "CLEANING YOUR ICE MACHINE" section for cleaning the unit for

 

 

 

 

proper operation.

 

 

Build up of deposits on evaporator plate.

See "CLEANING YOUR ICE MACHINE" section for cleaning the unit for

 

 

proper operation.

 

Condenser fan air flow is restricted.

Make certain the grille in the front of the unit is free and open for prop-

 

 

 

 

er air circulation. Check and clean the condenser coil by removing the

 

 

grille in the front of the unit. Clean the condenser with a vacuum and

 

 

brush attachment.

 

Room and/or water temperature is too warm.

Move the unit to an area where ambient temperature is below 90 deg.

 

 

 

 

F. The unit should not be placed next to a heat source such as an oven.

 

 

Check for cold water connection.

 

Leaking drain valve.

See "CLEANING YOUR ICE MACHINE" section for cleaning the unit.

 

 

 

 

This will also dissolve and flush out foreign material in the drain valve

 

 

causing it to leak.

 

Inadequate drain system.

Restriction in drain lines will cause ice in the bin to melt. If using a gravi-

 

 

 

 

ty drain, make certain there are no kinks or restrictions in the drain

 

 

lines. If using a drain pump, check the inlet screen, discharge line, and

 

 

vent line for any build or restrictions.

 

 

Grid cutter is unplugged.

Plug in the grid cutter so that ice slabs can be cut into cube.

 

 

 

 

 

 

10All specifications and product design subject to change without notice. Such revisions do not entitle the buyer to corresponding changes, improvements,

additions, replacements or compensation for previously purchased products.

Page 11
Image 11
Aga Ranges 30AIM manual Troubleshooting One

30AIM specifications

Aga Ranges has long been a hallmark of elegant cooking, combining traditional craftsmanship with modern technology. The Aga Ranges 30AIM model exemplifies this blend perfectly, making it a standout choice for culinary enthusiasts and home chefs alike. This iconic range cooker is designed not just for cooking but also for elevating the kitchen experience through its unique features and robust construction.

One of the main features of the 30AIM is its classic cast iron cooking framework. Cast iron provides exceptional heat retention and even distribution, ensuring that dishes are cooked to perfection every time. The 30AIM incorporates several ovens, allowing multiple dishes to be cooked simultaneously at different temperatures. This flexibility is ideal for baking, roasting, and simmering, all of which can occur without the flavors mingling.

Another significant characteristic of the 30AIM is its innovative energy-saving technology. With its induction cooking module, the 30AIM offers rapid heating and precise control over the cooking process. This induction technology not only speeds up cooking times but also enhances safety, as the cooking surface remains cool to the touch, reducing the risk of burns.

The 30AIM model also features a sleek, user-friendly control panel, allowing chefs to monitor their cooking easily. The integrated timer and temperature control systems provide convenience, ensuring that meals are consistently cooked to perfection. The range is available in various colors, adding a touch of personalization to any kitchen decor.

Moreover, the 30AIM emphasizes ease of cleaning, with accessible surfaces and removable parts that simplify maintenance. The combination of high-quality materials and thoughtful design ensures that this range will remain a centerpiece of the kitchen for years to come.

In essence, the Aga Ranges 30AIM is more than just a cooking appliance; it is a true culinary companion that embodies tradition and innovation. Its combination of cast iron construction, state-of-the-art induction technology, user-friendly features, and aesthetic appeal make it an exceptional choice for those who are serious about their cooking. Whether baking, roasting, or simply entertaining guests, the Aga Ranges 30AIM is designed to enhance every cooking experience while ensuring outstanding results.