Installation
Select Location
The proper location will ensure peak performance of your ice machine. Choose a location away from heat and out of direct sunlight. Best performance will be maintained when installed within the following parameters:
Ideal Ambient Temperature Range*
built-in 55-80°F
freestanding55-90°F
* Ice Machine will not perform correctly in ambient temperatures less than 55°F.
Cabinet Clearance
Ventilation is required for the bottom front section of the unit where the grille is located. Keep this area open and clear of any obstructions.
Adjacent cabinets and countertop can be built around the unit as long as no top trim or countertop is installed lower than the top of the hinge. Make certain that the glides supplied with the ice machine are installed according to instructions. Make certain your ice machine is level. Leveling adjustments can be made by raising or lowering the glides on the bottom of the unit.
DISCONNECT POWER SOURCE BEFORE
ADJUSTING LEVELING LEGS
Electrical Connection
Check the serial nameplate for the correct power supply. Use only the electrical power supply specified on the serial nameplate. Do not use an extension cord.
Grounding Method
This ice machine is equipped with a power supply cord with ground. It must be plugged into a mating grounding type receptacle in accordance with the National Electrical Code and applicable local codes and ordinances.
THIS UNIT SHOULD NOT, UNDER ANY CIRCUM-
STANCES, BE UNGROUNDED.
All specifications and product design subject to change without notice. | 3 |
Such revisions do not entitle the buyer to corresponding changes, improvements, additions, replacements or compensation for previously purchased products.
