Aga Ranges 30AIM manual Installation Drain Plumbing, Gravity Drain Location

Installation: Drain Plumbing

Drain Plumbing

Your ice machine uses a gravity drain, (figure 1) that requires 5/8" I.D. tubing from the back of the ice machine to a plumbed connection to a sanitary sewer. Remove the access panel to plumb in drain connection. Gravity drain location for built-in units can be within the area shown in figure 3. An optional drain pump, (figure 2) can be purchased for your ice machine if a gravity drain is not accessible.

OBSERVE AND FOLLOW ALL LOCAL CODES WHEN

INSTALLING ICE MACHINE.

figure 1

FAILURE TO USE ADEQUATE DRAINAGE SYSTEM

WILL RESULT IN SURROUNDING WATER DAMAGE

AND/OR POOR ICE PRODUCTION.

figure 2

figure 3

Gravity Drain Location

* With optional filler kit

4All specifications and product design subject to change without notice. Such revisions do not entitle the buyer to corresponding changes, improvements,

additions, replacements or compensation for previously purchased products.