4Touch “×” displayed on the screen with the corner of the “Memory Stick Duo” or the like. The position of “×” changes.
Touch [CANCEL] to cancel.
If you did not press the right spot, try the calibration again.
bNotes
•Do not use a
•You cannot calibrate the LCD screen if it is rotated, or closed with the screen facing out.
On handling the casing
•If the casing is soiled, clean the camcorder body with a soft cloth lightly moistened with water, and then wipe the casing with a dry soft cloth.
•Avoid the following to avoid damage to the finish:
–Using chemicals such as thinner, benzine, alcohol, chemical cloths, repellent, insecticide and sunscreen.
–Handling the camcorder with above substances on your hands.
–Leaving the casing in contact with rubber or vinyl objects for a long period of time.
On the pickup lens
•Do not touch the lens inside the disc cover. Keep the disc cover closed except when inserting and removing the disc, to keep dust out.
•When your camcorder does not work because the pickup lens is dirty, clean it with a blower (not supplied). Do not touch the pickup lens directly during cleaning because this may cause the camcorder to malfunction.
Pickup lens
Pickup lens 
Glossary (p. 147)
About care and storage of the lens
•Wipe the surface of the lens clean with a soft cloth in the following instances:
–When there are fingerprints on the lens surface.
–In hot or humid locations
–When the lens is exposed to salty air such as at the seaside.
•Store in a
•To prevent mold, periodically clean the lens as described above. It is recommended that you operate your camcorder about once a month to keep it in optimum state for a long time.
On charging the
Your camcorder has a
However, even if the
Information Additional
Continued , 133