About the Disc
See page 12 for the details of discs which you can use with your camcorder.
Notes on use
•Hold the disc by its edge while supporting the center hole lightly. Do not touch the recording side (the opposite of the printed side when using a
•Before shooting, be sure to remove dust and fingerprints from the disc with a soft cloth. Otherwise you may not be able to record or play normally in some situations using that disc.
•When you set the disc in your camcorder, press firmly until it clicks. When the message [C:13:ss] appears on the LCD screen, open the disc cover and set the disc again.
•Do not attach any adhesive material such as a sticker on the surface of a disc. If you do so, the disc may become unbalanced, and this may cause a malfunction of the disc or your camcorder.
Use of
xRecording on the A side
Place the disc in your camcorder with the side with the symbol at the center facing outwards until it clicks.
symbol
Place the symbol facing outwards.
Recording is made on the rear side.
•When using a
•When a
•Perform the following operations on each side of a
–Finalizing (p. 53)
–Unfinalizing (p. 61)
–Formatting (p. 59)
Information Additional
Continued , 103