To remove the battery pack
1Slide the POWER switch to OFF (CHG).
2Raise the viewfinder.
3Press the BATT (battery release) button and remove the battery pack.
bNotes
•When you remove the battery pack or the AC
Adaptor, make sure that the (Movie) lamp/ (Still) lamp (p. 21) is turned off.
When storing the battery pack
Fully discharge the battery before storing it for an extended period (see page 107 for the details of storage).
To use an outside power source
Make the same connections as you do when charging the battery pack. The battery pack will not lose its charge in this case.
To check the remaining battery (Battery Info)
Set the POWER switch to OFF (CHG), then press DISP/BATT INFO.
After a while, the approximate recordable time and battery information appear for about 7 seconds. You can view the battery
information for up to 20 seconds by pressing DISP/BATT INFO again while the information is displayed.
Remaining battery (approx.)
Recording capacity (approx.)
Charging time
Approximate time (min.) required when you fully charge a fully discharged battery pack.
Battery pack | Charging time |
135 | |
|
|
135 | |
| |
|
|
170 | |
| |
|
|
390 | |
|
|
Recording time
Approximate time (min.) available when you use a fully charged battery pack.
| Continuous | Typical |
| |
Battery pack | recording |
| recording |
|
| time |
| time* |
|
Image | HD | SD | HD | SD |
quality** |
|
|
|
|
|
|
|
|
|
60 | 75 | 30 | 35 | |
| 65 | 75 | 30 | 35 |
| 65 | 80 | 30 | 40 |
|
|
|
|
|
80 | 100 | 40 | 50 | |
(supplied) | 85 | 100 | 40 | 50 |
| ||||
| 90 | 105 | 45 | 50 |
|
|
|
|
|
Started Getting
Continued , 19