b)When SDI is selected, connect the VBS/SDI OUT connector to the SDI IN connector of the monitor.
When VBS is selected, connect the VBS/SDI OUT connector to the VIDEO IN connector of the monitor.
c)If you connect the TEST OUT connector to the monitor by setting TEST OUT SELECT to SD, the down converter
automatically operates even if REAR BNC OUT SEL is set to OFF.
4 d) When no picture is displayed on the monitor with the TEST OUT connector feeding the monitor, make sure the type of monitor (HD monitor / NTSC/PAL monitor) and the signal format of the output signal of the camcorder (1080i / 525i/625i) match.
e)When the NTSC/PAL viewfinder or NTSC/PAL monitor is connected, the markers and zebra patterns are not displayed when CROP is selected.
3 Turn the MENU knob to move the t mark to the item you want to set, and push MENU knob.
The t mark at the left of the selected item changes to the z mark and the z mark at the left of the setting changes to the ? mark.
4 Turn the MENU knob to change the desired setting, and push the MENU knob.
The z mark at the left of the selected item changes to the t mark and the ? mark at the left of the setting changes to the z mark.
5
6
To continue the setting of another output signal, repeat steps 3 and
4.
To end menu operations, turn the MENU ON/OFF switch to OFF.