2 Set the POWER switch to ON. Check that the HUMID indicator |
|
does not appear and that the BATT indicator shows at least five |
|
segments. |
|
• If HUMID indicator appears, wait until it disappears. |
|
Note |
|
After turning off the power, check whether the drum is dry (even if | 3 |
the HUMID indicator is off) when the turning on the power again. |
•If the BATT indicator does not show at least five segments, replace the battery pack with a fully charged one.
3 Check that there are no obstructions near the cassette lid. Then press the EJECT button to open the cassette lid.
4 After checking the points below, load the cassette and close the cassette lid.
•The cassette is not
•There is no slack in the tape.
Chapter 3 Recording and Playback |