• Setup data specified by video engineers, including the video settings,

 

1

 

can be stored in the camcorder itself and on a memory stick as a scene

 

file. This makes it possible to load setup data appropriate for the scene.

 

•Correction values for lens extenders and individual lenses can be stored as a lens file. The values can then be recalled. This makes it possible to shorten adjustment time when the lens is replaced.

•A high-performance viewfinder is adjustable forward, backward, and sideways, and has a full range of auxiliary equipment.

•The camcorder is provided with the XLR 5-pin connector, which allows connection of a stereo microphone. The ASSIGN 1/2 switches allow microphone mode to be switched between stereo and monaural.

•The HD SDI output (corresponding to Embedded Audio) makes it possible to monitor the camera image and playback image.

•Attaching the HKDW-702 down converter (not supplied) (converting to 525i/625i signal 1)) allows the camera image and playback image to be monitored on the NTSC/PAL monitor. This board makes it possible to output the SDI signal (corresponding to Embedded Audio).

•Three down converter modes are available: SQUEEZE, LETTER BOX and CROP.

•The camcorder is provided with the LIGHT connector. This feeds power to the light from a battery or AC adaptor connected to the camcorder.

•The viewfinder supplied with NTSC/PAL type camcorders, such as the BVW-400A/400AP, can be attached to the HDW-750/750CE in emergencies (only when the HKDW-702 (not supplied) is attached). Some functions are not available with this viewfinder.

•The camcorder has the ASSIGN 1/2 switches, which can be assigned functions.

....................................................................................................................................

1)When the HKDW-702 is attached to the HDW-750, the HD signal is down- converted to the 525i signal. When the HKDW-702 is attached to the HDW- 750CE, the HD signal is down-converted to the 625i signal.

Chapter 1 Overview 1-3