| 13 Push the MENU knob. | |
| The tmark at the left of REC TIME changes to the z mark and | |
| the z mark at the left of the setting changes to the question mark. | |
| 14 Turn the MENU knob clockwise or counterclockwise until the | |
3 | ||
desired time to be recorded on the tape appears. | ||
|
|
If you turn the MENU knob clockwise or counterclockwise, the Loop Rec time changes in order of 5 SEC y10SEC y15SEC y20SEC y30SEC y40SEC y50SEC y1MIN y 2MIN y.......38MN y39MIN y40MIN.
where SEC means seconds (5SEC is 5 seconds) and MIN means minutes (1MIN is one minute).
You cannot set a REC TIME that is less than one thirtieth as long as
TAKE TOTAL TIME.
For example: When TAKE TOTAL TIME is set to 1H, the smallest value of REC TIME is 2 MIN. (60 minutes divided by 30 gives 2 minutes.)
The time setting to be displayed when turning the MENU knob changes within the available setting times.
Be sure to set REC TIME after setting TAKE TOTAL TIME.