Sanyo PLCXL51 Image adjustment, Input source, Controlling the projector, Description, Item

Chapter 7 Controlling the projector

Image adjustment

This function is to adjust the projected picture image and save the image mode. To store the adjusted value, click Store button, and to load the adjusted value, click Load button.

Item	Description
Contrast	Adjusts picture contrast
Brightness	Adjusts picture brightness
Color	Adjusts picture color saturation
Tint	Adjusts picture hue

Item	Description
Color temp	Sets a color temperature mode.
White balance
Red, Green,
Blue	Adjusts each white balance respectively.
Sharpness	Adjusts picture sharpness.

*When the value of the white balance is changed, the color temp. indicates "Adj."

			Item		Description
			Gamma		Adjusts brightness of darker part of the picture.
			Noise reduction		Switches noise reduction mode
			Progressive		Switches progressive mode
			Reset		Resets the Image adjustment to previous levels.
			Store		Stores the Image adjustment values. Select an item
					[Image 1 - Image 4] from the pull-down menu and click
					Store button.
			Load		Loads the Image mode.
					Select an image mode from
					the pull-down menu and
					click Load button. There
					may not be available mode
					depending on the input
					mode as shown in the table
Input source					left.
Image mode	Video Computer
Dynamic	4	4
Standard	4	4
Real	*	4
Cinema	4	*
Blackboard(Green) 4		4		✐ The mark "4" indicates the available image mode in the selected input
Colorboard	4	4		source. The error message appears when the disabled image mode
Image 1 - 4	4	4		indicated with "*" is selected.

68