Sanyo PLCXL51 Setting of output destination and conversion mode, Output destination, Folder

Creating the available data [Network Viewer 5]

Setting of output destination and conversion mode

When clicking Change button on the confirmation window in the step 3 on the previous page, following option setting window appears.

Output destination

Select either Folder or FTP server as the output destination of the converted files.

Folder

Output folder	Specify a folder in the local hard disk or
	shared computer in the network

FTP server

Host name	Enter host name or IP address of the FTP
	server
Root Folder	Specify the root directory of the FTP server.
	Normally use "/".
User ID	Enter your login account of the FTP sever.
Password	Enter your password of the FTP server.
Output folder	Specify a directory of the FTP server.

Conversion mode

Resolution	Selects output image resolution (VGA to SXGA+)
	✐ The image resolution higher than the projector's panel resolution cannot be displayed.
Image rotation	Selects image rotation (0, 90, 180, 270).
Conversion Type
Fit	Converts either width or height of the image to fix the maximum screen width or height.
Justify
[both ends]	Converts width of the image to fix the
	maximum screen width.
Justify
[top and bottom]	Converts height of the image to fix the
	maximum screen height.
Cut	Cuts image with the screen size not
	depending on the image size for the
	cutting modes. See the right figure.
	✐ Select this mode when you want to have
	the images with the original size. Select
	each mode by clicking on the button.
Image Quality	Selects an image conversion quality with "High", "Mid" or "Low".

113