Sanyo PLCXL51 owner manual Control by the computer, Network capture functions

Chapter 8 Network capture functions

[1] Control by the computer

* PC provides the Network Capture.

PC1	Project this screen	PJ1	PJ2
	image with PJ2.

Capture

PC3

PC4

PC6 * Start capturing from the

PC5

PC1.

Select input mode to "Network" previously.

1 Start up Network Capture 5.

2 Select the projector(s) listed on the projector list on the application window and click Start real time capture. The application window will disappear and then the screen image of the computer will appear on the projected screen in real time.

* You can select multiple projectors (up to 5) on the projector list.

•To stop capturing, click One-shot capture on the popup menu appearing by clicking on the Network Capture 5 icon on the task bar. The captured image of the computer on the screen is frozen.

•To restart capturing, click Start real time capture on the popup menu.

3 To end capturing, click Terminate capture on the popup menu appeared by clicking on the Network Capture 5 icon on the task bar.

One-shot capture

Terminate Capture

Window show..

Version information..

Shut down

✐ If the error message appears, check the item "Parameter set up" (+ p.88).

✐ The sound output from the projector can be controlled with the volume slider and mute item on the application

90

window of the Network Capture 5 software (+ p.24, p.86).