5 Check each of the following operations and make sure that the indicator lights if the corresponding item has been turned on in the '!' LED page of the USER menu.

•Set the gain to anything but 0 dB by using the GAIN selector and the GAIN SW page of the OPERATION menu.

•Set the SHUTTER selector to ON.

•Set the WHITE BAL switch to PRST.

•Use the lens extender.

•Set the ND FILTER selector to anything but “1".

•Set the reference value of the auto iris to other than the standard value.

6

Push the SHUTTER selector from ON to SEL repeatedly, and check

 

 

that the shutter setting changes on the viewfinder screen.

6

7

Pointing the camera at a suitable subject, focus the camera and

 

 

check the picture on the viewfinder screen.

8

Set both of the AUDIO IN switches to FRONT, and check that when

 

 

sound is input to a microphone connected to the MIC IN connector

 

 

on the front of the camcorder, the audio level indicators appear on

 

 

the viewfinder screen.

9

Check that setting the ZEBRA switch to ON and OFF makes the

 

 

zebra pattern appear and disappear on the viewfinder screen.

Note

The current display status may inhibit one or more of the displays or operations mentioned in steps 3 to 9. If this happens, set the desired items in the VF DISP1 and VF DISP 2 pages of the USER menu.

For details, see “4-7-2 Selecting the Display Items” on page 4-69.

6-4Chapter 6 Maintenance