Manuals / Brands / Home Audio / Home Theater System / Sony / Home Audio / Home Theater System

Sony DAV-HDX265, HDX265, HDX266, HDX267W 13GB, – BASIC – Started Getting, To change the color system, 1 Turn off the system by pressing "/1, To connect the FM wire antenna (aerial)

1 104

Download 104 pages, 1.96 Mb

To connect the FM wire antenna (aerial)Connect the FM wire antenna (aerial) to the FM 75 Ω COAXIAL jack.

FM wire antenna (aerial)	FM wire antenna (aerial)
(supplied)	(supplied)
	or
FM 75 Ω COAXIAL jack	FM 75 Ω COAXIAL jack

Note

•Be sure to fully extend the FM wire antenna (aerial).

•After connecting the FM wire antenna (aerial), keep it as horizontal as possible.

Tip

•If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the unit to an outdoor FM antenna (aerial) as shown below.

Unit

Outdoor FM antenna (aerial)

4Connecting the AC power cord (mains lead)

Before connecting the AC power cord (mains lead) of this unit to a wall outlet (mains), connect the speakers to the unit.

Changing the color system (PAL or NTSC)(Asian, Australian, and Middle Eastern models only)

Depending on the TV to be connected, you may be required to select either PAL or NTSC for the color system.

The initial setting of the system for Australian and Middle Eastern models is PAL. The initial setting of the system for Asian models is NTSC.

To change the color system1 Turn off the system by pressing "/1.2 Turn on the system by pressing "/1 while pressing X on the unit.

Each time you perform this operation, the color system toggles between PAL and NTSC. “NTSC” lights up in the front display when the color system is set to NTSC.

– BASIC – Started Getting

13GB

Contents

2-895-959-11(1) ©2007 Sony Corporation WARNING For the customers in the U.S.A literature accompanying the appliance Serial No WARNING –Reorient or relocate the receiving antenna (aerial) –Increase the separation between the equipment and receiver –Consult the dealer or an experienced radio/TV technician for help CAUTION Welcome Table of Contents This System Can Play the Following Installing the Speakers on a Wall Connecting the TV (Advanced) Connecting Other Components (CUSTOM PARENTAL CONTROL, PARENTAL CONTROL) Getting Optimal Surround Sound for a (SPEAKER FORMATION) About This Manual This System Can Play the Following Discs Music discs encoded with copyright protection technologies Note on DualDiscs About Multi Session CD Region code DVD VIDEOs labeled ALL will also play on this system Inserting batteries into the remote Attaching the foot pads to the subwoofer – BASIC – Started Getting Step 1: Connecting the System and TV 1Connecting the Speakers Required cords To avoid short-circuitingthe speakers 11GB Getting Started – BASIC – 2Connecting the TV AVideo cord BAudio cord (not supplied) 3Connecting the Antenna (Aerial) To connect the FM wire antenna (aerial) Connect the FM wire antenna (aerial) to the FM 75 Ω COAXIAL jack 4Connecting the AC power cord (mains lead) Changing the color system (PAL or NTSC) (Asian, Australian, and Middle Eastern models only) Step 2: Positioning the System Step 3: Performing the Quick Setup 10 Press AUDIO IN / A.CAL MIC 12 Press Auto Calibration starts 13 Unplug the calibration mic and press C To recall the Quick Setup display 1Press DISPLAY when the system is in stop mode The Control Menu display appears 2Press X/x to select [SETUP], then press The options for [SETUP] appear Turning off the Demonstration Installing the Speakers on a Wall Connecting the TV (Advanced) ATo connect to a TV with the VIDEO IN jack Connect the video cord BTo connect to a TV with the S VIDEO IN jack CTo connect to a TV with the COMPONENT VIDEO IN jacks To connect to a TV with the HDMI 2 Press VIDEO FORMAT The current type of video signals appears in the front panel display Each time you press VIDEO FORMAT, the display changes as follows: 1280 × 720p 720 × 480p xNORMAL (INTERLACE) Select this setting when: – your TV does not accept progressive signals, or xPROGRESSIVE – your TV accepts progressive signals, and Connecting Other Components To listen to the portable audio source sound through the system Wireless system option 25GB Playing Discs To save the power in standby mode Press "/1 while the system turns on. To cancel standby mode, press "/1 once To turn on/off the DISC 1-5indicators’ illumination 1Press SYSTEM MENU 3Press X/x to select a setting Enjoying the Radio or Other Components Enjoying TV or VCR Sound from All Speakers Selecting the Movie or Music Mode Enjoying Surround Sound by Using Sound Field Using only the front speaker and subwoofer x2 CHANNEL STEREO Enjoying the surround sound by headphones xHEADPHONE 2 CHANNEL STEREO xHEADPHONE VIRTUAL Searching for a Particular Point on a Disc (Scan, Slow-motionPlay, Freeze Frame) Searching for a Title/ Chapter/Track/Scene, etc Searching by Scene (Picture Navigation) Resuming Playback from the Point Where You Stopped the Disc (Resume Play) Creating Your Own Program (Program Play) 4 Press c 5 Select the track you want to program 6 To program other tracks, repeat steps 4 to 7 Press H to start Program Play To return to normal play Playing in Random Order (Shuffle Play) Playing Repeatedly (Repeat Play) Using the DVD’s Menu Changing the Sound xWhen playing a DVD-VR Example: •[1: MAIN](main sound) •[1: SUB] (sub sound) •[1: MAIN+SUB] (main and sub sound) DVD-RW Viewing Information About the Disc 2 Press DISPLAY repeatedly to change the time information xWhen playing a VIDEO CD (with PBC functions) Playing time of the current scene xWhen playing a VIDEO CD (without PBC functions) or CD •T **: Changing the Angles Displaying the Subtitles Adjusting the Delay Between the Picture and Sound (A/V SYNC) About MP3 Audio Tracks and JPEG Image Files Playback order of MP3 audio tracks or JPEG image files xStructure of disc contents A t B t C t D t F t G 47GB Playing DATA CDs or DATA DVDs with MP3 Audio Tracks and JPEG Image Files xWhen selecting an image To play the next or previous JPEG image file To rotate a JPEG image Various 49GB Playing Audio Tracks and Images as a Slide Show with Sound Selecting an effect for image files in the slide show 2 Press X/x to select [EFFECT], then press The options for [EFFECT] appear Press X/x to select a setting •[MODE1]: The image sweeps in from top to bottom Enjoying DivX® Videos (Except for United Kingdom and North American models) 3 Press H To select DivX video files, see “Selecting a DivX video file” (page 53) To go to the next or previous page Press C/c Selecting a DivX video file Playing VIDEO CDs with PBC Functions (Ver.2.0) (PBC Playback) Presetting Radio Stations Listening to the Radio 6 Create a name by using the cursor buttons 7 Press 8 Press SYSTEM MENU Viewing the station name or frequency in the front panel display 57GB Using the THEATRE SYNC Function Using the Sound Effect Using the Sleep Timer Changing the Brightness of the Front Panel Display Using the DIGITAL MEDIA PORT Adapter Deactivating the Buttons on the Unit (Child Lock) Locking Discs (CUSTOM PARENTAL CONTROL, PARENTAL CONTROL) To play a disc for which Custom Parental Control is set 1Insert the disc for which Custom Parental Control is set The [CUSTOM PARENTAL CONTROL] display appears 2Enter your 4-digitpassword using the number buttons, then press The system is ready for playback 4 Enter or re-enteryour 4-digitpassword using the number buttons, then press The display for setting the playback limitation level appears 5 Press X/x to select [STANDARD], then press The selection items for [STANDARD] are displayed The area is selected Getting Optimal Surround Sound for a Room (SPEAKER FORMATION) 5 Press C/c to select a setting •[STANDARD]: when installing all the speakers normally •[NO CENTER]: when installing the front and surround speakers •[NO SURROUND]: when installing the center and front speakers •[FRONT ONLY]: when installing the front speakers Calibrating the Appropriate Settings Automatically (AUTO CALIBRATION) 6 Press C/X/x/c to select [YES] or [NO], then press xThe measurement is OK Disconnect the calibration mic, then select [YES]. The result is implemented Adjustments and Settings Advanced 5 Press X/x to select [YES], then press Using the Setup Display The Setup item is selected Example: [SCREEN SETUP] 5 Select an item using X/x, then press The options for the selected item appear. Example: [TV TYPE] 6 Select a setting using X/x, then press The setting is selected and setup is complete To reset all of the [SETUP] settings Settings for the Display [SCREEN SETUP] x[YCBCR/RGB (HDMI)] Selects the type of HDMI signal output from HDMI OUT jack Outputs YCBCR signals Outputs RGB signals •If the playback picture becomes distorted, set [YCBCR] to [RGB] Custom Settings [CUSTOM SETUP] x[TRACK SELECTION] (DVD VIDEO only) x[MULTI-DISCRESUME] (DVD VIDEO/ VIDEO CD only) Switches the Multi-discResume setting on or off x[AUDIO DRC] (DVD VIDEO only) x[AUDIO (HDMI)] Settings for the Speakers [SPEAKER SETUP] x[LEVEL (SURROUND)] To adjust the volume of all the speakers at one time Turn the VOLUME control on the unit, or press VOLUME +/– on the remote x[TEST TONE] x[LEVEL (FRONT)] Returning to the Default Settings Precautions Notes about the Discs Troubleshooting Picture noise appears Color irregularity occurs on the TV screen Sound There is no sound No sound is output from the HDMI OUT jack The sound loses stereo effect when you play a VIDEO CD, a CD, or an MP3 •Set [AUDIO] to [STEREO] by pressing AUDIO (page 39) •Make sure the unit is connected properly •Make sure the sound field function is on (page 30) The sound comes from the center speaker only The MP3 audio tracks and JPEG image file starts playing simultaneously The titles of album/track/file name are not displayed correctly A disc does not start playing from the beginning The system starts playing the disc automatically Playback stops automatically Self-diagnosisFunction (When letters/numbers appear in the display) Specifications Speakers Front (SS-TS72) Center (SS-CT71) Surround (SS-TS71) Subwoofer (DAV-HDX265/DAV-HDX267W) Glossary xMovie mode xMusic mode Dolby Surround Pro Logic DTS DVD Film based software, Video based software HDMI (high-definitionmultimedia interface) Interlace format (Interlaced scanning) MPEG audio Multi-anglefunction VIDEO CD 90GB Language Code List Index to Parts and Controls Rear panel 93GB Front panel display About the indications in the front panel display DLights up when a station is received. (Radio only) (55) EStereo/Monaural effect (Radio only) (56) FLights up when the sleep timer is set. (60) Guide to the Control Menu Display 1 2 ( 2 7 ) 1 8 ( 3 4 ) DVD VIDEO 1 : 3 2 : 5 List of Control Menu items Selects the title, scene, or track to be played Selects the chapter or index to be played Selects the track to be played 96GB 97GB DVD Setup Display List You can set the following items with the DVD Setup Display The order of the displayed items may be different from the actual display System Menu List You can set the following items with SYSTEM MENU on the remote Index Numerics 101GB Page Remote control