Basic Operations

Enjoying the Radio or Other Components

FUNCTION

SYSTEM

MENU

X/x/c,

Selecting the connected component

You can use a VCR or other components connected to the TV/VIDEO jacks on the rear panel. Refer to the operating instructions supplied with the components for further information.

Press FUNCTION repeatedly until “TV/ VIDEO” appears in the front panel display.

Each time you press FUNCTION, the mode of the system changes in the following sequence.

DVD t TUNER FM t TUNER AM t TV/VIDEO t DMPORT t AUDIO t
Changing the input level of the sound from connected components

Distortion may occur when listening to a component connected to the TV/VIDEO jacks on the rear panel or to the AUDIO IN jack on the front panel. This is not a malfunction and will depend on the component connected.

To prevent this, you can change the input level from the sound of the other components.

1 Press FUNCTION repeatedly until “TV/ VIDEO” or “AUDIO” appears in the front panel display.

2 Press SYSTEM MENU.

3 Press X/x repeatedly until “ATTENUATE” appears in the front panel display, then press or c.

4 Press X/x to select a setting.

The default setting is underlined.

“ATT ON”: attenuates the input level. The output level is changed.“ATT OFF”: normal input level.5 Press .

The setting is made.

6 Press SYSTEM MENU.

The system menu turns off.

28GB