Specifications (continued)
FM tuner section
Tuning range | 87.5 - 108.0 MHz |
Antenna terminals | 75 ohms, unbalanced |
Intermediate Frequency | |
| 10.7 MHz |
Sensitivity |
|
Mono: | 18.3 dBf, 2.2 µV/75 ohms |
Stereo: | 38.3 dBf, 22.5 µV/75 ohms |
Usable sensitivity | 11.2 dBf, 1 µV/75 ohms |
S/N |
|
Mono: | 76 dB |
Stereo: | 70 dB |
Harmonic distortion at 1 kHz | |
Mono: | 0.3% |
Stereo: | 0.5% |
Separation | 45 dB at 1 kHz |
Frequency response | 30 Hz – 15 kHz, |
| |
Selectivity | 60 dB at 400 kHz |
AM tuner section
Tuning range
Models of area code U, CA
With
With
Models of area code E2/E3
With
With
Models of area code CEL, CEK, SP, AU With
Models of area code MX
With
Antenna | Loop antenna |
Intermediate Frequency | |
| 450 kHz |
Usable sensitivity | 50 dB/m (at 1,000 kHz or |
| 999 kHz) |
S/N | 54 dB (at 50 mV/m) |
Harmonic distortion | 0.5 % (50 mV/m, 400 Hz) |
Selectivity |
|
At 9 kHz: | 35 dB |
At 10 kHz: | 40 dB |
5)You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. Hold down PRESET TUNING + and press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs |
|
Video: | 1 |
Outputs |
|
Video: | 1 |
General
Power requirements
Area code | Power requirements |
U, CA, MX | 120 V AC, 60 Hz |
|
|
CEL, CEK | 230 V AC, 50/60 Hz |
|
|
SP | 220 – 230 V AC, 50/60 Hz |
|
|
E2/E3 | 120/220/240 V AC, 50/60 Hz |
|
|
AU | 240 V AC, 50Hz |
| |
Power consumption | |
Area code | Power consumption |
|
|
U, MX | 185 W |
|
|
CA | 270 VA |
|
|
CEL, CEK, SP, AU | 180 W |
|
|
E2/E3 | 190 W |
|
|
Power consumption (during standby mode)
0.3 W
Dimensions | 430 ⋅ 145 ⋅ 298 mm |
| (16 7/8 ⋅ 5 6/8 ⋅ 11 6/8 |
| inches) including |
| projecting parts and |
| controls |
Mass (Approx.) | 7.2 kg (15 lb 14 oz) |