Installing the speakers on a flat surface

Before you install the speaker and subwoofer, be sure to attach the supplied foot pads to prevent vibration or movement as shown in the illustration below.

Example of HT-SS1300 front speaker

HT-SF1300 only

You need to attach the supplied foot pads to the center speaker and subwoofer only.

HT-SS1300 only

You need to attach the supplied foot pads to all the speakers and subwoofer.

Installing the speakers on the speaker stand

HT-SS1300 only

For greater flexibility in positioning the speakers, use the optional WS-FV11 or WS-FV10D speaker stand (available only in certain countries). For details, refer to operating instructions supplied with the speaker stand.

HT-SF1300 only

For greater flexibility in positioning the speakers, use the supplied speaker stand. For details, refer to supplied speaker stand installation guide.

Installing the speakers on the wall

You can install your speakers on the wall.

1 Prepare screws (not supplied) that are suitable for the hook on the back of each speaker. See the illustrations below.

4 mm

more than 25 mm

4.6 mm

10 mm

Hook on the back of the speaker

2 Fasten the screws to the wall. The screws should protrude 5 to 7 mm.

5 to 7 mm

12GB