The surround effect cannot be obtained.•Make sure you have selected a sound field with MOVIE or MUSIC button.

•Sound fields do not function for signals with a sampling frequency of more than 48 kHz.

Dolby Digital or DTS multi channel sound is not reproduced.

•Check that the DVD, etc. you are playing is recorded in Dolby Digital or DTS format.

•When connecting the DVD player, etc., to the digital input jacks of this receiver, check the audio setting (the settings for the audio output) of the connected component.

There is no sound from the component connected to the DIGITAL MEDIA PORT adapter.

•Adjust the volume of this receiver.

•The DIGITAL MEDIA PORT adapter and/or component is not connected correctly. Turn off the receiver, then reconnect the DIGITAL MEDIA PORT adapter and/or component.

•Check the DIGITAL MEDIA PORT adapter and/or component device to make sure it supports this receiver.

Video

There is no picture or an unclear picture appears on the TV screen or monitor.

•Make sure you have connected the video output of your video component to the TV.

•Move your audio components away from the TV

HDMI

The source sound input to the HDMI jack on the receiver is not output from the TV speaker.

•Check the setting of “AUDIO FOR HDMI” in the VIDEO menu (page 40).•Check the HDMI connection.•You cannot listen to the Super Audio CD by connecting HDMI.

•Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied with each component.

The source image input to the HDMI jack on the receiver is not output from the TV.

•Check the HDMI connection.

•Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied with each component.

The Control for HDMI function does not work.•Check the HDMI connection (page 53).•Make sure “CONTROL FOR HDMI” is set to “CTRL ON” in the VIDEO menu.

•Make sure the connected component is compatible with the Control for HDMI function.

•Check the Control for HDMI settings on the connected component. Refer to the operating instructions of the connected component.

•Repeat the procedures of “Preparing Control for HDMI function” if you change the HDMI connection, connect/disconnect the AC power cord, or when there is a power failure (page 54).

66GB